Buy directly from our laboratory, with freshly manufactured products, batch traceability and formats for every need. There are two options: CDS solution at 0.3% (3000 ppm), already produced by electrolysis and ready to use, and kits containing 25% sodium chlorite + 4% HCl activator to generate it yourself.
Which chlorine dioxide should you buy? Choose according to your needs
- CDS 3000 ppm ready to use. A 0.3% chlorine dioxide solution produced by electrolysis, without acid activators and with a neutral pH: simply open and use, without handling reagents. Available from 100 ml to 1 litre in amber glass bottles with a syringe included, and in a 5-litre HDPE container.
- Sodium Chlorite + Activator Kit. Includes two containers: 25% sodium chlorite and 4% hydrochloric acid, available from 60 ml to 5 litres of each component. For those who already have the equipment needed for preparation. It is the most economical option per millilitre of final solution.
- CDS Preparation Kit. The most complete kit for obtaining CDS through gasification: includes the 140 ml Sodium Chlorite + Activator Kit and the necessary preparation equipment, with a 500 ml airtight glass jar, mixing cup, 10 ml syringe and 250 ml amber glass bottle.
Which statement best describes your situation?
- “I'm looking for the purest chlorine dioxide.” → CDS 3000 ppm. Produced by electrolysis: without acids, without residues and with a neutral pH.
- “I don't have time for mixing: I want to open and use it.” → Ready-to-use CDS 3000 ppm. Arrives prepared, with no components to handle.
- “It's my first time and I don't want complications.” → CDS 3000 ppm in 100 ml or 250 ml. No preparation or mixing required.
- “I want the lowest cost per millilitre.” → Sodium Chlorite + Activator Kit. In return, you need to mix the components before use.
- “I want to prepare my own solution but don't have the equipment.” → CDS Preparation Kit.
- “I need a large volume and don't want to prepare anything.” → CDS in 1 litre or 5 litres. The cost per millilitre is significantly lower.
- Already have your kit and only need to replace components? Find sodium chlorite, activator and accessories in our CDS Kit collection.
What is chlorine dioxide (ClO2)?
Chlorine dioxide (ClO2) is a gas that, when dissolved in water, forms a yellow solution with a characteristic odour. It is mainly used in drinking water treatment.
CDS (Chlorine Dioxide Solution) is this solution of chlorine dioxide in water. Ours leaves the factory at 3000 ppm, equivalent to 0.3%: two ways of expressing the same concentration. Sodium chlorite (NaClO2) is not chlorine dioxide, but rather the precursor used to generate it, and it is one of the components of our kits.
Chlorine dioxide for drinking water treatment
Chlorine dioxide is a biocide included under Article 95 of Regulation (EU) 528/2012 for the treatment of water intended for human and animal consumption.
The dosage depends on the volume and quality of the source water, and it should never be used undiluted. Always consult the product information sheet and label for instructions for use.
Electrolysis or activation: two ways to obtain chlorine dioxide
Most chlorine dioxide on the market is obtained through activation, which involves reacting sodium chlorite with an acid. This is the principle used in our kits, both through direct activation and gasification.
Our CDS, on the other hand, is manufactured by electrolysis: starting with sodium chlorite alone and without acid activators, an electrochemical process produces a purer gas without residues. The result is a high-purity, neutral-pH solution that is already prepared. Beyond purity, there is a practical difference: CDS arrives ready to use, while the kits require you to prepare the solution according to the instructions.
- Electrolysis (CDS 3000 ppm): Without acids or activators and without activation residues, with a neutral pH. No preparation required: arrives ready to use. Ideal for those seeking maximum purity and convenience.
- Activation (kits): Uses hydrochloric acid as an activator, leaves activation residues and the pH depends on the preparation. You prepare it yourself, following the instructions for use. Ideal for those seeking a lower cost per millilitre and greater independence.
Chlorine dioxide prices and formats
The price of chlorine dioxide depends on the format. CDS 3000 ppm is available from 100 ml to 5 litres: up to 1 litre in amber glass bottles and the 5-litre format in an HDPE container, with a significantly lower cost per millilitre in larger formats. Do you use it regularly? Subscribe and receive your CDS every 1, 2 or 3 months without having to remember to place an order. You'll always have freshly manufactured products, with a discount on every delivery, and you can pause or cancel whenever you wish.
The Sodium Chlorite + Activator Kit is available from 60 ml to 5 litres of each component, while the CDS Preparation Kit comes in a single 140 ml format. Updated prices and availability for each format can be found on the corresponding product page.
Where to buy chlorine dioxide in Spain?
At Dioxnatur, we are authorised manufacturers. You can buy chlorine dioxide in our online store: directly from our laboratory in Alicante, without intermediaries. Delivery within 24 hours throughout Spain, free shipping on orders over €40 in mainland Spain, and international shipping available.
If you're looking for a ready-made solution, discover our CDS 3000 ppm. If you prefer to obtain it using reagents, explore the kits available in this category.